Air Tools

Brad Leight:15mm \n5000pcs/color box \nSuitable for \nTAT81501,TAT83501,TAT83301,TAT83301-3 \nGa18,1.25X1.0mm \nPacked by color box

Nozzle length:80mm \nOnly with Nitto type connector. \nPacked by sliding card

Air tire inflating gun \nMax pressure:8.5Bar(120PSI) \nWith Europe type connector, USA type \nconnector, Nitto type connector and Italy \ntype connector. \nPacked by sliding card \n 

Load capacity:100Pcs \nStaple size:6-13mm \nGa20,1.2X0.6mm \nStaple crown:11.2mm \nWithout safety trigger \nOnly with Nitto type connector. \nOperation pressure:0.4-0.7Mpa(60-100Psi

Capacity:30L \nDrum application:330*430mm \nPressure ratio: 50:1 \nWorking pressure:6-8bar \nMax.free flowrate:850g/min \nMax.fluid pressure:400bar \nCylinder dia:70mm \nAir consumption:250L/min@6.2bar \n1/4" inlet and outlet air regulator with water \nfiltering device

Standard nozzle:1.5mm \nPattern width:180-250mm \nPaint capacity:400cc \nSuitable for base coat \nWith Europe type connector, USA type \nconnector, Nitto type connector and Italy \ntype connector. \nOptional nozzle:1.5-2.0mm \nOperation pressure:3-4bar \nAir cons:3.5-6.0cfm(99-170l/min)

Staple size:10mm \n5000pcs/color box \nSuitable for TAT8131-3 \nGa20,1.2X0.6mm \nStaple crown:11.2mm \nPacked by color box

Staple size:13mm \n5000pcs/color box \nSuitable for TAT8131-3 \nGa20,1.2X0.6mm \nStaple crown:11.2mm \nPacked by color box

Length:38mm \n1000pcs/plastic box \nSuitable for TAT8641 \nNail head:6.4mmX2.2mm \nShank diameter:2.2mm \nPacked by plastic box

Voltage:220-240V~50HzInput power: 1.8kW(2.5HP) Tank:50L(13.2Gal)Noise:96dbPump lubricated with oil No-load speed:2850rpmOperation pressure:max.8barPacked by carton box

Voltage:220-240V~50Hz \nInput power: 2.2kW (3HP) \nTank:100L(26.4Gal) \nNoise:92db \nCopper wire induction motor \nBelt driving system \nPump lubricated with oil \nNo-load speed:950rpm \nOperation pressure:max.8bar \nPacked by wooden case

Nozzle length:16mm \nOnly with Nitto type connector. \nPacked by sliding card